Toro Sprinkler Timer with Computer Programming Option E User Manual download pdf (Page 38)

Once programmed, the ECXTRA memory will be

retained for several years with or without power. Only

the current time and date information will be lost and will

need to be reset if power is disconnected for more than

24 hours.

The programmable memory can be cleared and reset to

the default settings of individual programs or all pro-

grams simultaneously. (Refer the the default settings

listed on page 21.)

IMPORTANT: This procedure permanently erases the pro-

grammable watering information and can not be automati-

cally restored once the procedure has been completed.

To clear the memory of a selected program (Example 1):

Turn the control dial to the season adjust

position.

Check the programs switch setting. If necessary,

reposition the switch to select the desired program.

Press the next button to access the clear memory

feature; CL will be displayed and begin flashing.

Press and hold the –/off button until CL stops

flashing (approximately five seconds). The memory

will be cleared to the default settings.

5. To clear the memory of another program, repeat all

of the steps starting at step .

Return the control dial to the

run position.

To clear the memory of all programs (Example 2):

Turn the control dial to the off position.

Press the next button to access the clear memory

feature; CL will be displayed and begin flashing.

Press and hold the –/off button until CL stops

flashing (approximately five seconds). The memory

will be cleared to the default settings.

Return the control dial to the

run position.

Service and Specifications

Clearing the Program Memory

Example 1

Example 2

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

No comments

Toro Sprinkler Timer with Computer Programming Option E User Manual Page 38