Toro 2WD Specifications download pdf (Page 2)

2014 Toro Commercial Equipment Guide 14-003-T Rev. 1/14

Groundsmaster

360 2WD Specifications*

GROUNDSMASTER 360 – 2WD, TIER 4 DIESEL, MODELS 31228, 31229

ENGINE

Kubota,

3-cylinder, liquid-cooled diesel. Power: 24.8 hp (18.5 kW) gross, at rated speed of 3000 rpm. Torque peak: 71.5 (52.7) Nm (lbs-ft) @ 2200 rpm. Displacement:

1123cc. High idle: 3200 rpm no load (uninstalled) 3100-3200 installed. Remote-mounted 5" Donaldson

air cleaner. Fuel filter/water separator. EPA Tier IV Final Compliant.

FUEL CAPACITY

13.5 gallons (51.1 liters) diesel. Biodiesel Ready for use up to B-20 (20% biodiesel and 80% diesel blend).

TRACTION DRIVE

Independent high-torque, low-speed wheel motors with 280 cc displacement. Dual pump hydrostatic drive system with optional differential lock.

TIRES

Front & Rear: (All 4 tires and wheels are the same part number) 23/10.5x12 6 ply pneumatic tubeless, demountable and interchangeable. Tread Kenda K500 TL similar to “Toro Tuff Trac”.

AIR CLEANER

Dry, replaceable primary element.

GAUGES

Hour meter, fuel gauge, indicator lights for glow plugs, high coolant temperature, battery charge, and low oil pressure.

Automatic shutdown for high coolant temperature. Two wheel steer lockout indicator light on 4WD units.

CONTROLS

Ignition switch, hand-throttle, foot-operated traction pedal with mowing speed control stop, service brake with parking brake latch, switch for raising and lowering cutting unit.

GROUND SPEED

Transport and Mow: Forward 0-10 mph (0-16 km/h), variable. Reverse 0-8.5 mph (0-13.7 km/h), variable.

RADIATOR

Rear mount, cross flow, 6.5 fins per 1” (25 mm), 8 quart (7.6 liter) capacity

MAIN FRAME

Rectangular structured steel tube and high strength steel plate welded construction.

BRAKES

Service Brake: Foot pedal with dynamic braking through hydrostatic transmission. Parking Brake: foot actuated brake lever with two 8” (20.3 cm) diameter drum

brakes mounted on the rear wheel motors.

STEERING

Quad Steer™ all wheel steer with four wheel Ackermann steering. Two turns Lock to Lock controlled via steering wheel and automatic synchronizing hydraulic cylinders.

ELECTRICAL

12-volt, 40 amp internal regulated alternator/generator charging @ 3150 rpm. Battery: BCI Group No. 34, 690 cold cranking amps @ 0° F (-17.78° C).

INTERLOCKS

Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat with deck engaged, engine stops. If operator leaves the seat with the unit out

of neutral, engine stops. Engine stops if parking brake engaged and traction pedal not in neutral. High temp (PTO shuts down but engine remains running), Over temp (engine shuts down).

SEAT

High back cushion vinyl seat with drain hole, deluxe low profile mechanical suspension, 4” (10 cm) fore-aft travel with an additional 44 mm (1.75”) foreword

adjustment, armrests standard, retractable seat belt, lateral shock absorption.

OPERATOR AREA

Operator platform with isolated operator seat (all models). Storage area behind operator seat, 12-volt power outlet, cup holder.

HYDRAULICS/COOLING

3 gallon (11.4 liter) capacity, suction spin-on filter mounted to transmission, oil cooler 6.5” x 17”x 3.5” (16.5 cm x 43.2 cm x 8.9 cm). Bar and Plate Core; 6.5 serpentine fins per 1” (25 mm).

PTO CLUTCH

Hydraulically actuated wet multi disc clutch.

ROLL-OVER PROTECTION

2 post Standard foldable ROPS certified per ISO/DIS 21299.2 specifications Cab ROPS certified

SAFETY

Complies with American National Standards Institute (ANSI B71.4-2004)

CERTIFICATION

Certified to meet SAE J2258. Certified to meet ISO/DIS 21299 for ROPS. Engine meets all applicable emission standards per the manufacturer. Certified to meet

C-Tick 2004/108/EC/(EMC). Certified to meet the CE Machinery Directive.

WARRANTY

Two year limited

DIMENSIONS & WEIGHT WITH CUTTING DECKS

HEIGHT ROPS UP

78” (198 cm)

OVERALL LENGTH

91.5” (232 cm)

OVERALL WIDTH

78” (198 cm) [72” (183 cm) base deck] / 75” (191 cm) [72” (183 cm) side discharge deck] / 55” (140 cm) wheel to wheel

WHEELBASE

57” (145 cm)

EST. SHIPPING WEIGHT

2,522 lbs. (1145 kg)

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

The Groundsmaster 360 is manufactured

in Tomah, WI ISO 9002 Certified Plant.

PART NUMBER

GROUNDSMASTER 360 ATTACHMENTS AND ACCESSORIES

AIR RIDE GRAMMER SEAT

Air ride suspension and vinyl cushions. Model 30511.

SPARK ARRESTOR KIT

Part No. 119-8018

SPEED REDUCTION KIT

Model 30547

ROTATING BEACON KIT

Part No. 120-0256

BIMINI CANVAS SHADE

Model 30358

UNIVERSAL MOUNT SUNSHADE

Model 30349

DIFFERENTIAL LOCK

Model 30508

NORTH AMERICA ROAD

LIGHT KIT

Includes headlights, red/amber flashers, turn signals and one rear work light. Model 30513

SMV SIGN KIT

Part No. 115-0014

1 2 3

Comments to this Manuals

No comments

Toro 2WD Specifications Page 2

Comments to this Manuals

Related products and manuals for Lawnmowers Toro 2WD