Toro 2WD Specifications download pdf (Page 4)

2015 Toro Commercial Equipment Guide 15-003-T Rev. 5/15

Groundsmaster

360 4WD Specifications

GROUNDSMASTER 360 – 4WD

TIER 4 FINAL DIESEL, MODEL 31200(A)

GROUNDSMASTER 360 – CAB

TIER 4 FINAL DIESEL, MODEL 31202

ENGINE

Yanmar; 3-cylinder common-rail, liquid-cooled, diesel with EGR and diesel particulate filter (DPF), 36.8hp (27.5 Kw) rated @ 3000 rpm, 80 ft-lbs @ 1950 rpm, High idle

3000 rpm, Low idle 1400 rpm, displacement 1642 cc. Remote mounted Donaldson air filter, external spin-on oil filter and high flow fixed fan. EPA Tier IV Final Compliant.

FUEL CAPACITY

13.5 gallons (51.1 liters) diesel. Biodiesel Ready for use up to B-20 (20% biodiesel and 80% diesel blend).

TRACTION DRIVE

Independent high-torque, low-speed wheel motors with 280 cc displacement. CrossTrax® drive system utilizing series parallel hydraulic drive circuit with full time

forward and reverse 4WD. Patent pending.

TIRES

Front & Rear: (All 4 tires and wheels are the same part number) 23/10.5x12 6 ply pneumatic tubeless, demountable and interchangeable. Tread Kenda K500 TL similar to “Toro Tuff Trac”.

AIR CLEANER

Dry, replaceable primary element.

INSTRUMENTATION

InfoCenter™: Onboard LCD display shows gauges, alerts/faults, service reminders, and electrical system diagnostics. Indicates coolant temp, intake temperature, low

oil pressure, alternator, engine hours, engine rpm, hydraulic oil temperature, voltage

CONTROLS

Ignition switch, throttle switch, foot-operated traction pedal with mowing speed control stop, service brake with parking brake latch, switch for raising and lowering cutting unit.

GROUND SPEED

Transport and Mow: Forward 0-12 mph (0-19.3 km/h), variable. Reverse 0-6 mph (0-9.7 km/h), variable.

RADIATOR

Rear mount, cross flow, 6.5 fins per 1” (25 mm), 8 quart (7.6 liter) capacity

MAIN FRAME

Rectangular structured steel tube and high strength steel plate welded construction.

BRAKES

Service Brake: Foot pedal with dynamic braking through hydrostatic transmission. Parking Brake: foot actuated brake lever with two 8” (20.3 cm) diameter drum

brakes mounted on the rear wheel motors.

STEERING

Quad Steer™ all wheel steer with four wheel Ackermann steering. Two turns Lock to Lock controlled via steering wheel and automatic synchronizing hydraulic cylinders.

4WD models have rear wheel steer lock out position, providing front two wheel steering (2WS).

ELECTRICAL

12-volt, 55 amp internal regulated alternator/generator charging @ 3150 rpm. Battery: BCI Group No. 26, 540 cold cranking amps @ 0° F (-17.78° C).

INTERLOCKS

Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat with deck engaged, engine stops. If operator leaves the seat with the unit out of

neutral, engine stops. Engine stops if parking brake engaged and traction pedal not in neutral. High temp (PTO shuts down but engine remains running), Over temp (engine shuts down).

SEAT

High back cushion vinyl seat with drain hole, deluxe low profile mechanical

suspension, 4” (10 cm) fore-aft travel with an additional 44 mm (1.75”) foreword

adjustment, armrests standard, retractable seat belt, lateral shock absorption.

Grammer low profile air ride suspension, cloth cushions, retractable seat belt,

lateral shock absorption.

OPERATOR AREA

Operator platform with isolated operator seat (all models), 12-volt power outlet, cup holder.

HYDRAULICS/COOLING

3 gallon (11.4 liter) capacity, suction spin-on filter mounted to transmission, oil cooler 6.5” x 17”x 3.5” (16.5 cm x 43.2 cm x 8.9 cm). Bar and Plate Core; 6.5 serpentine fins per 1” (25 mm).

PTO CLUTCH

Hydraulically actuated wet multi disc clutch.

ROLL-OVER PROTECTION

2 post Standard foldable ROPS certified per ISO/DIS 21299.2 specifications Safety cab is ROPS certified

ALL-SEASON SAFETY CAB

Factory installed, ROPS certified, pressurized cab with AC and heat. Tempered curved windshield, opening side window, opening rear window, emergency exit: front,

rear or side window, tinted side and rear glass (50% tint); front wiper/washer; interior mirror and exterior side mirrors; SMV sign; interior dome light. Model 31202

only. Road light kit and work light kit sold separately. All glass windows meets ANSI Z-26.1999 and ECE R43

FUEL ECONOMY

1.1 gallons/hr (4.8 litres/h)**

SAFETY

Complies with American National Standards Institute (ANSI B71.4-2004)

CERTIFICATION

Certified to meet SAE J2258. Certified to meet ISO/DIS 21299 for ROPS. Engine meets all applicable emission standards per the manufacturer. Certified to meet C-Tick

2004/108/EC/(EMC). Certified to meet the ISO EN5395 Machinery Directive requirement.

WARRANTY

Two year limited

DIMENSIONS & WEIGHT WITH CUTTING DECKS (Cutting Decks Sold Separately)

HEIGHT ROPS UP

78” (198 cm) 86” (218 cm) (Cab height)

OVERALL LENGTH

110” (279 cm) / 117” (297 cm) with front Quick Attach System™ (QAS) only

OVERALL WIDTH

78” (198 cm) [72” (183 cm) base deck] / 75” (191 cm) [72” (183 cm) side discharge deck] / 55” (140 cm) wheel to wheel

WHEELBASE

57” (145 cm)

EST. SHIPPING WEIGHT

2,658 lbs. (1206 kg) 3,134 lbs. (1422 kg)

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual

products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

**Dependent on operator and turf conditions. Assume 85% efficiency for turns and overlap; 8 mph (12.9 km/hr) mow speed.

The Groundsmaster 360 is manufactured

in Tomah, WI ISO 9002 Certified Plant.

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Toro 2WD Specifications Page 4

Comments to this Manuals

Related products and manuals for Lawnmowers Toro 2WD