Toro Sentinel User Manual download pdf (Page 27)

Clear the alarm by selecting the desired station and pressing the OFF key. A station may

be disabled or eliminated from auto operation by manually turning the alarm status to

ON. This is useful if the station is in need of repair or if disabling is desired for a single

station.

Note: Disabling a station by setting its alarm status to ON does not change the length of

time a program runs. The program will still reserve a time slot during operation, but will

not energize the station.

Over Currents

Selecting this menu item will display the over current status of individual stations. Over

current alarms are set to ON if a station has an electrical problem that can cause a fuse to

blow if allowed to continue running. The status of the over current alarms may be

changed by selecting the desired stations and pressing the ON/OFF keys.

Even when a station has been electrically disabled, the time management is left in the

control of the operator.

Note: Over current protection does not operate while in the Edit mode.

Clear Flow Alarms

Clear Flow Alarms - Selecting this menu allows global clearing of all flow alarms on all

stations. Pressing ENTER will execute the command and display WAIT. When the

alarms are cleared, DONE will be displayed. Normal program operation will then

resume.

Clear Fuse Alarms

Clear Fuse Alarms - Selecting this menu item allows global clearing of all fuse alarms on

all stations. Pressing ENTER will execute the command and display WAIT. When the

alarms are cleared, DONE will be displayed. Normal program operation will then

resume.

Clear Map Alarms

Select this option to clear all remote output alarms. This includes all mapped output

communication alarms. They may be MapTo Universal, Two-Wire, or wireless outputs.

Pressing ENTER will execute the command and display WAIT. When the alarms are

cleared, DONE will be displayed. Normal program operation will then resume.

Clear Power Fail

Clear Power Failure - Selecting this menu item allows clearing of the power failure

alarm. Whenever power is lost, the power failure alarm is activated. Select Clr Power Fail

from the menu and press ENTER to clear the alarm.

1 2 ... 22 23 24 25 26 27 28 29 30

No comments

Toro Sentinel User Manual Page 27