Toro GreenKeeper 212 User Manual download pdf (Page 23)

Turn the control dial to the STATION TIMES

position.

Check the

PROGRAMS switch setting. If necessary,

reposition the switch to select the desired program.

Station number 1 will be flashing and its current run

time or OFF will be shown. To select a different sta-

tion number, press the +/

ON or –/OFF button until the

desired station number is flashing.

Press the

NEXT button. The run time (or OFF) will

begin flashing.

To set the run time, press the +/

ON or –/OFF button

until the desired run time is shown.

Note: To remove the run time, select OFF by press-

ing the +/

ON and –/OFF buttons at the same time.

Press the

NEXT button. The next station number will

begin flashing.

7. Repeat steps and as needed to set, change,

or remove the run time for the remaining stations

8. To set the station run time for another program,

repeat all of the steps starting at step .

Return the control dial to the

RUN position.

Setting Station Run Times

PGM A

123 4 5 6

3 5

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

No comments

Toro GreenKeeper 212 User Manual Page 23