Toro 2-wire User Manual download pdf (Page 17)

The Pause command is used to suspend active program or manual irrigation. The Pause function allows the

user to specify the pause duration.

Pause / Resume Function Directions

Pause function example: Program 01 has been manually activated. Pause program 01 for 30 minutes.

1. Press the Pause key.

2. Use the Input Dial to select All, M-Man or Prg:XX (XX = the program number). If multiple programs

are active, use the Right Arrow key to tab to the program number field before using the Input Dial to

select the correct program number. For this example, select

Prg: 01.

3. Press the Down Arrow to advance the cursor to the

for: field. Use the Input Dial and the

Right Arrow key to select the pause duration in hours and minutes. For this example, set the pause

duration to

00 hr 30 min.

The display should read:

Note: The default pause time is 00 hr 05 min minutes.

4. Press the Pause key to initiate the Pause function.

Resume Controller Activity example: Reactivate Program 01 watering.

1. Press the Pause key.

2. Use the Input Dial until the correct program or multi-manual operation is displayed.

For this example, select

Resume: Prg: 01.

The display should read:

3. Press the Pause key to release the Pause function.

Resume: Prg: 01

Press PAUSE to pause

01 Programs Paused

Pause: Prg: 01

for: 00hr 30 min

Press PAUSE to pause

00 Programs Paused

Pause / Resume Key

1177

1 2 ... 12 13 14 15 16 17 18 19 20

No comments

Toro 2-wire User Manual Page 17