Toro Single Station Battery Operated Valve Timer (53887) User Manual

iSingle Station Waterproof TimerInstallation and Programming GuideSingle Station Waterproof TimerInstallation and Programming GuideFeatures• Up to fou

8Press or to cycle to the correct start time hour. Press to set.4. e minute number (00:00) will ash. Press or to advance to the correct s

9day, irrigation will run past midnight.Off ModeOFF mode turns o the watering program. Active Day boxes disappear. e time display and “OFF” toggle b

10Manual Operation 1. To turn on the valve manually, press and together.2. e valve will run for the programmed run-time (page 8).3. To prem

11Installing a Rain SensorIt is possible to connect a wired Toro® RainSensor™ to the SST. Other normally closed sensors can be installed as well. Wire

12The Reset Buttone Reset button resets the controller to erase all watering programs.1. Remove the battery compartment lid and battery.2. In the u

13Troubleshooting GuideProblem Possible Cause SolutionController does not display anything.1. e battery is dead.2. Controller is in Sleep mode.1.

14The Toro Company and its afliate, Toro Warranty Company, pursuant to an agreement between them, jointly warrants, to the owner, against defects in

iiiiTable of ContentsParts Identication ...

11122335544Parts IdentificationCongratulations on purchasing a Toro® Single Station Timer (SST). You have a powerful but easy to use battery-operated

2Battery InstallationBattery installation should take place before attaching the SST to a valve. If you have already attached the SST to a valve, you

3* e included DC-latching solenoid is not compatible with Hunter® brand valves. Use of the SST with Hunter valves requires a Hunter DC-latching solen

4LCD Overview1. Low battery indicator. If the icon is ashing, the battery is low and should be changed. If the icon is solid, the controller will no

5Programming the SSTEvery programming operation begins by pressing the MODE button. A long press (>2 seconds) turns the controller o. A short pres

6Set Clock 1. e icon shows. e hour number (12:00 or 00:00 depending on mode chosen above) will ash. Press or to cycle to the correct hour.

7Set Run Time 1. e icon shows. e default run time per program is 10 minutes. 2. Press or to adjust the hours. Press .3. Press or to