Toro EVOLUTION Series WEATHER SENSOR Installation Manual

1SpecificationsIntroductionEVOLUTION® Series Add-On:EVO-WS Weather SensorEVOLUTION® Series Add-On:EVO-WS Weather SensorCongratulations on purchasing T

10Weather Sensor MenuCURRENT ADJUST ---TEMPERATURE 81°FRAIN STATUS DRY 39°FDRYOUT DAYS 02SENSORS→FREEZE OFF ATCurrent Adjuste perc

11Update Timeis is the time at which the sensor will update the controller with new ET data. If irrigation were to commence at 6am, for example, it m

12BatteryUnder normal operating conditions, the Weather Sensor battery can last up to ve years. A weak battery condition in the sensor is indicated o

13Review Screene Review screen allows operators to review settings for the various sensors added to the controller.1. Press the Review button.2. Pr

14Toro SupportToro Commitment to QualityToro is committed to developing and producing the highest quality, best per-forming, most dependable products

15Installation NotesFCC Part 15 Rulesis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

16©2014 e Toro Company, Irrigation Division • www.toro.com • 1-877-345-8676 (US and Canada)[email protected] (international)Form Number 373-0806 Rev

2Specications 1Weather Sensor Overview 3Installation 4Smart Connect® 4e SD Card Explained 4Adding the Sensor to the Controll

31. Rain Sensor Test PinPressing the test pin simulates operation of the Rain Sensor by transmitting a signal to the Smart Pod. 2. Rain Sensor Adjus

4EVOLUTION® Smart Connect®SD Card Explainede supplied SD card contains forty years of weather data for all latitudes, longitudes, and zip codes in No

53. to WEATHER. to ADD. to conrm.4. e EVOLUTION® controller waits for the identication signal from the weather sensor. 5. Activate the s

66. e controller should detect the sensor. Conrm that the device ID detected matches the sensor’s actual ID.If it does match, press and continue

7Adjusting the Rain Sensor Thresholde Weather Sensor is preset to suspend watering at 1/4” (6 mm) of accumulated rainfall. ree alternate settings of

82. (A) For rain gutter installation: back the bracket thumbscrew out to clear the rain gutter edge. Holding the Weather Sensor in position, tighten

9Menu Navigation• Use or to navigate the menu commands.• To change a value, press or to move to the desired eld, then press and to adju