Toro Network VP Satellite Series User Manual download pdf (Page 19)

13. Press the Right Arrow to advance the cursor to the next entry field. This entry field will indicate the

runtime in hours, minutes and seconds ( HH:MM:SS). Use the Input Dial and the Right Arrow Key

to select the appropriate runtime value. For this example, set the value to 00:15:00.

14. Press the Down Arrow to advance the cursor to the Simult: field. Use the Input Dial to

select the maximum allowable simultaneous active station. For this example, set the value to 05.

When finished, the display should read:

P 02 100% 01:15:00 (01:15:00 = 1 hours & 15 minutes total program runtime)

Hold: None

Type: Advanced

Days: SMTWTFSSMTWTFS

Set>: X X X X X X

Start: 01 05:45am

Syringe: 00 min

Repeats: 0

Soak: – – : – – : – –

Sta#: 06–10 00:15:00

Sta#: – – – – – – – : – – : – –

Simult: 05

Grow In Irrigation Program Setting:

Grow In Irrigation Program example: Create program 3 with stations 21–30 for 5 minutes each with no percent

adjustment. Set the start time at 6:30 am and the end time at 4:00 pm. Set the delay for 2 hours and 15 minutes

and the maximum simultaneous active station to 5.

1. Press the Scheduled Watering Key . The cursor is initially located at the program selection field. Use the

Input Dial to select the program (P01–P64) you want to create or modify. For this example, select

program 03.

2. Press the Right Arrow Key to advance to the Percent Adjust field. Normally this setting will be 100%

unless weather or other condition suggest that less or more irrigation is needed. Use the Input Dial

to adjust the setting. For this example, no adjustment is needed.

3. Press the Down Arrow to advance the cursor to the Hold: field. Use this option to suspend program

operation. Select from None, Today, 02–30 days or Permanent. For this example, select None.

4. Press the Down Arrow to advance the cursor to the Type: field. Use the Input Dial to

adjust the setting. For this example, set the Type to Grow-In.

5. Press the Down Arrow to advance the cursor to the Start: field. This start time will indicate the

starting point of the Grow-In cycle. Use the Input Dial to select the start time value. Use the Left

and Right Arrow Keys to navigate between the Hours and Minutes fields. For this example, set the

start time to 06:30am.

6. Press the Down Arrow to advance the cursor to the End: field. This end time will indicate the end point

of the Grow-In cycle. Use the Input Dial to select the end time value. Use the Left and Right Arrow

Keys to navigate between the Hours and Minutes fields. For this example, set the end time to

04:00pm.

(Continued to the next page)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

No comments

Toro Network VP Satellite Series User Manual Page 19