Toro Network VP Satellite Series User Manual download pdf (Page 24)

% (Percent) Adjust

The percent adjust function allows you to fine tune irrigation programs. With weather conditions changing

constantly, Percent Adjust allows you to tune your system easily without changing all the values in the program.

% Adjust Directions

1. Press the % Adjust Key . The cursor is initially located at the Satellite % Adjust field. Use the Input Dial

to adjust the satellite watering up to 900% or down to 1%.

Note: The satellite adjustment will affect all stations and programs universally. Do not adjust the satellite %

settings if adjustment is station or program specific.

2. Press the Down Arrow to advance the cursor to the Program: field. The first entry field will be the

program selection field. Use the Input Dial to select the program being adjusted. Press the Right

Arrow to advance the percent adjustment field. Use the Input Dial to adjust the program

watering up to 250% or down to 10%. Repeat step 2 to adjust additional programs.

Note: Do not adjust the program % setting if adjustment is station specific.

3. Press the Down Arrow to advance the cursor to the Station: field. The first entry field will be the

station selection field. Use the Input Dial to select the station being adjusted. Press the Right

Arrow to advance to the percent adjustment field. Use the Input Dial to adjust the station

watering up to 900% or down to 000%. Repeat step 3 to adjust additional stations.

Note: Adjusting the station’s watering to 000% will prevent it from running within a program. Multi-Manual

and Syringe are not affected by the % Adjustment.

Diagnostics

The Diagnostics function of the Network VP satellite allows for easy system troubleshooting. Within this

function, the user can monitor the satellite’s internal voltages as well as check the satellite’s firmware version.

Use the Input Dial to navigate through the menus while in the Menu: field.

Menu: Link Monitor – This menu item allows you to monitor communication network traffic.

Menu: System Monitor – This menu item allows you to monitor all the satellites in the system.

Menu: Revision – This menu item will display the satellite firmware version and creation date.

Menu: Power-Up Detect – This menu item will display the number of detected stations, number of

detected sensors. It will also display the date and time of the last power-down

(PD) and last power-up (PU). Press the Down arrow to scroll down the

informations.

Menu: Seq Stations – This menu item allows you to activate all the stations sequentially. Use the Input

Dial to set the time duration from 0.01 sec, 0.1 sec, 0.5 sec, 1 sec,

5 sec, 10 sec, 1 min or 5 min. The user can observe the operation of each

station when troubleshooting the system using this option.

Menu: Station Test – Use this menu item to test individual stations. Press the Down arrow to

access the station number field. Select the station you want to test and press

START key . You can step to the next or previous station number by using

the Input Dial .

1 2 ... 19 20 21 22 23 24 25 26 27 28

No comments

Toro Network VP Satellite Series User Manual Page 24