Toro Network VP Satellite Series User Manual download pdf (Page 12)

Satellite Settings

Satellite Settings allows you to set satellite parameters such as Time, Date and Language.

Use the Up or Down Arrows to navigate through the menus.

Use the Left and Right Arrow to advance to the next entry field on the same menu line.

Use the Input Dial to select values when editing.

Comm Mode: – Use this menu item to select the satellite mode of operation between Central, Local or Off mode.

Hold All: – Use this menu item to suspend satellite operation and choose the suspension duration from

Today, 02-30 days, Permanent or None.

Hold Rain: – Use this option to suspend satellite operation and choose the suspension duration from

Today, 02-30 days, Permanent or None. When activated, Hold Rain will cancel any current

watering, along with suspending operation.

Reset Prg’s: – Use this menu item to reset all satellite irrigation program by selecting Yes. After selecting

Yes, press the Up or Down Arrows to activate. The following will display:

Reset All Programs

to defaults

05 (5-second countdown)

STOP to escape

All program data will be erased after a successful reset.

Reset Sta’s: – Use this menu item to reset all station settings by selecting Yes. After selecting Yes, press the

Up or Down Arrows to activate. The following will display:

Reset All Stations

to defaults

05 (5-second countdown)

STOP to escape

All station settings will be erased after a successful reset.

Reset Unit: – Use this menu item to reset the satellite settings by selecting Yes. Select Yes using the Input

Dial and press the Up or Down Arrows to activate. The following will

display:

Reset All Defaults

10 (10-second countdown)

STOP to escape

After the 10-second countdown, the satellite will reboot.

Resetting the unit will erase all user-defined program data and configuration values in the

satellite’s memory.

Enable Sta’s: – Use this menu item to reset all disabled stations with one execution. This function will also

clear all station alarms related to under/over current conditions. Select Yes All using the Input

Dial and press the Up or Down Arrows to activate. Select No to

cancel. Individual stations can be enabled/disabled by using the Disable function within the

Station Settings menu.

Reset Amps: – The Network VP 3.0 automatically monitors the electrical output current for each individual

stations. Network VP 3.0 ensures that each station operates properly by comparing the

station’s electrical current draw to a nominal value. Use this menu item to reset all stations’

electrical current values. Select Yes All using the Input Dial and press the Up or

Down Arrows to activate. Select No to cancel. Individual stations can be reset by

using the Nominal function within the Station Settings menu.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comments to this Manuals

No comments

Toro Network VP Satellite Series User Manual Page 12

Comments to this Manuals

Related products and manuals for Unknown Toro Network VP Satellite Series