Toro Network VP Satellite Series User Manual download pdf (Page 15)

Edit Name: – Use this menu item to assign a name description to the station. The naming format is XX-AA-

YYY, where XX represents the golf course hole number, AA represents the area description

acronym and YYY represents the sprinkler number within the area. By following the naming

format, you can easily figure out where and what area the station is watering.

Area Description Acronym Listing

GR = Greens DR = Driving Range TE = Tee CH = Club House FW = Fairways

LA = Landscape RF = Rough PG = Putting Green AP = Approaches MS = Misc.

Last On: – This menu item will display the last activation current value that the satellite recorded for the

station.

Nominal: – This menu item will display the nominal current value that the satellite recorded for the station.

You can reset the value by selecting Reset. Use the Input Dial to select Reset and

press Up or Down arrows to select. Once Reset is selected, Nominal values will

default to 0 (Zero). The satellite will record the new value on the next station activation.

Note: Nominal values can also be updated by activating Setup Amps from the Satellite

Settings menu or selecting Reset from the Nominal item under Station Amps menu in Diagnostics.

Performing these function will reset all of the station’s nominal current values.

Tol +/– : – Use this menu item to set the individual station’s nominal current tolerance. This value

will determine the station’s allowable current operating range. If the satellite subsequently

determines that the station is operating outside of the allowable range, the satellite will disable

the station and generate an alarm.

Alarm Events – This menu item will display any alarm events incurred from previous activation. Alarm event

messages will disappear when the satellite detects that the fault has been fixed.

Pump Nomn: – This menu item will display the pump output nominal current value. This value can not be

modified in this menu item. To reset this value, select Reset from the Nominal: menu item. This

value will also reset when Setup Amps from the Satellite Settings menu is activated.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

No comments

Toro Network VP Satellite Series User Manual Page 15