Toro Network VP Satellite Series User Manual download pdf (Page 21)

5. Press the Down Arrow to advance to the Sta field. Use this field to enter the station numbers that

corresponds to the currently displayed sequence. Use the Right and Left arrows to navigate

between the station number fields. Use the Input Dial to select station number. Set Stations 01,

05, 07 and 09 to sequence 01.

Repeat Steps 4 and 5 to set additional sequences. Set a 20-minute station runtimes to sequence 02.

Set stations 02, 03, 04, 11, 12 and 13 to sequence 02.

Note: Network VP will allow you to set a station that is already assigned to another sequence but it will

delete that station number from the sequence it was previously assigned.

When finished, the display should read:

GMM S M T W T F S 00:35:00

Set X X X X Act days

Start: 01 09:00pm

Seq#: 01 00:15:00

St 01 05 07 09 – – – –

Clear GMM: No

GMM S M T W T F S 00:35:00

Set X X X X Act days

Start: 02 03:00am

Seq#: 02 00:20:00

St 02 03 04 11 12 13

Clear GMM: No

6. To clear GMM, press the Down Arrow to advance to the Clear GMM: field.

Use the Input Dial to No or Yes. Select Yes if you want to clear the GMM parameters.

You must press the Up Arrow to after selecting Yes to activate selection.

Station Based Flow Management:

The SBF (Station Based Flow) screen can be accessed from the Scheduled Watering menu.

Follow the steps to access.

1. Press the Scheduled Watering Key . The cursor is initially located at the program selection field. Use the

Input Dial to select SBF List which is located between GMM and P01.

Note: The SBF List is only available after a successful download from SitePro.

2. Use the Right arrow to navigate to the event number.

3. Use the Input Dial to select the event number you want to review.

SBF (Station Based Flow) Sample Screen:

SBF List Event 001 (1st line will indicate the Event Number)

Start 12:00am S22 (2nd line will indicate the Start Time followed by the Station Number)

Run 00:10:00 P26 (3rd line will indicate the Runtime [Hrs:Min:Sec] followed by the Program Number)

Program Start (80) (4th line indicate Miscellaneous Functional Code)

Note: Editing to the SBF List is not allowed in the satellite level. SBF modifications must be made in SitePro

and downloaded back to the satellite to update.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Toro Network VP Satellite Series User Manual Page 21